Accuracy and stability evaluation of different blood sampling methods in blood gas analysis in emergency patients: A retrospective study.

BACKGROUND: To evaluate the accuracy and stability of arterial blood gas (ABG) results by comparison with venous measurements from routine blood tests, and to compare the accuracy and performance of two sampling syringes, pre-heparinized syringe (PHS) and disposable arterial blood syringe (DABS), in ABG analysis. METHODS: We retrospectively analyzed the practical use of PHS and DABS in collecting ABG samples, involving 500 and 400 patients, respectively. For each patient, in addition to the ABG sample, a venous blood sample was also collected using a venous blood collection tube (VBCT) and used for routine blood tests. Accordingly, patients were referred to as the PHS + VBCT group and DABS + VBCT group. The correlation between arterial and venous values of each blood parameter in each group was evaluated using the interclass correlation coefficient (ICC). Bland-Altman was performed to evaluate the agreement between arterial and venous values and compare the performance of PHS and DABS in ABG sample collection. RESULTS: In the PHS + VBCT group, arterial K+ , Na+ , hemoglobin (Hb), and hematocrit (HCT) were 0.32 mmol/L, 2.90 mmol/L, 2.21 g/L, and 1.27% significantly lower their corresponding venous values while arterial Cl- was 7.60 mmol/L significantly higher than venous Cl- . In the DABS + VBCT group, arterial K+ and Na+ were 0.20 mmol/L and 1.19 mmol/L significantly lower while Cl- and HCT in arterial blood were 5.34 mmol/L and 0.66% significantly higher than their corresponding venous values. In both groups, arterial K+ , Na+ , Hb, and HCT values were highly consistent with their corresponding venous values, with all ICCs greater than 0.70, especially Hb and HCT. Bland-Altman analysis demonstrated that arterial K+ and Na+ were more consistent with venous counterparts in the DABS + VBCT group, with a narrower 95% limits of agreement than the PHS + VBCT group (K+ , -0.7-0.3 mmol/L vs. -1.1 to 0.5 mmol/L; Na+ , -5.8 to 3.4 mmol/L vs. -8.2 to 2.4 mmol/L). CONCLUSION: Arterial blood gas analysis of K+ , Na+ , Hb, and HCT using PHS or DABS for blood sampling is accurate and stable, especially DABS, which can provide clinicians with fast and reliable blood gas results.

Evaluation of BD Barricor™ and PST™ blood collection tubes compared to serum for testing 11 therapeutic drugs on a Roche Cobas® 8000 platform.

INTRODUCTION: The type of blood collection tube used when obtaining samples for therapeutic drug monitoring (TDM) has important implications on the accuracy of results. Serum tubes without a gel separator are currently considered best practice. We sought to evaluate the performance of Barricor™, a novel plasma tube that utilizes an inert mechanical separator, as well as a gel-based tube (PST™) for testing acetaminophen, digoxin, gentamicin, methotrexate, phenobarbital, phenytoin, salicylate, vancomycin, valproic acid, carbamazepine, and theophylline on a Roche Cobas® 8000 platform. METHODS: Paired patient samples were collected from individuals taking at least one of the medications evaluated. These were supplemented with spiked specimens to ensure a minimum of 40 paired samples per drug. All drugs were measured within two hours of collection on Roche e602 or c502 instruments. Deming regression was used to assess bias between Barricor™ vs serum and PST™ vs serum. Seven-day refrigerated stability was also assessed in Barricor™, PST™, and serum tubes in a subset of samples (n = 10) for each drug. RESULTS: Drug concentrations in Barricor™ were similar to serum for each drug assessed. In contrast, a negative bias was observed in PST™ compared to serum tubes for carbamazepine (-7.6%) and phenytoin (-6.8%) although this did not surpass our total allowable error goal of 10%. All drugs recovered within ±10% of baseline value when samples were stored refrigerated for 7 days except for carbamazepine, phenytoin, and phenobarbital where significant analyte loss was observed within the first day in PST™ tubes. CONCLUSION: Barricor™ tubes are a suitable alternative to serum for TDM on the Roche Cobas® 8000 platform.

Self-collection of capillary blood using Tasso-SST devices for Anti-SARS-CoV-2 IgG antibody testing.

BACKGROUND: Efforts to minimize COVID-19 exposure during the current SARS-CoV-2 pandemic have led to limitations in access to medical care and testing. The Tasso-SST kit includes all of the components necessary for remote, capillary blood self-collection. In this study, we sought to investigate the accuracy and reliability of the Tasso-SST device as a self-collection device for measurement of SARS-CoV-2 IgG antibodies. METHODS: Capillary blood was obtained via unsupervised and supervised application of the Tasso-SST device, and venous blood was collected by standard venipuncture. Unsupervised self-collected blood samples underwent either extreme summer or winter-simulated shipping conditions prior to testing. Sera obtained by all three methods were tested concurrently using the EuroImmun anti-SARS-CoV-2 S1 IgG assay in a CLIA-certified clinical laboratory. RESULTS: Successful Tasso-SST capillary blood collection by unsupervised and supervised administration was completed by 93.4% and 94.5% of participants, respectively. Sera from 56 participants, 55 with documented (PCR+) COVID-19, and 33 healthy controls were then tested for anti-SARS-CoV-2 IgG antibodies. Compared to venous blood results, Tasso-SST-collected (unstressed) and the summer- and winter-stressed blood samples demonstrated Deming regression slopes of 1.00 (95% CI: 0.99-1.02), 1.00 (95% CI: 0.98-1.01), and 0.99 (95% CI: 0.97-1.01), respectively, with an overall accuracy of 98.9%. CONCLUSIONS: Capillary blood self-collection using the Tasso-SST device had a high success rate. Moreover, excellent concordance was found for anti-SARS-CoV-2 IgG results between Tasso-SST capillary and standard venous blood-derived sera. The Tasso-SST device should enable widespread collection of capillary blood for testing without medical supervision, facilitating epidemiologic studies.

Isobutylene contamination of blood collected in 10-ml evacuated blood collection tubes with gray conventional rubber stoppers.

Dual-column headspace gas chromatographic analysis with two flame-ionization detectors is a commonly used analytical technique for forensic blood ethanol quantitation. This technique is also applicable to the identification and quantitation of other volatile organic compounds such as methanol in biological samples. Compound identification by retention time is limited to those compounds with known retention times programmed into the instrument method. Historically, an early-eluting peak from an unidentified compound has been observed in both chromatograms from antemortem blood samples analyzed for ethanol concentration with this technique. The unidentified compound's retention time matches that of methanol on one column but not on the second column. This previously unidentified compound has been identified as isobutylene. The proposed source of the isobutylene contamination historically observed in antemortem blood samples collected in 10-ml gray-top blood collection tubes is the conventional rubber stopper. Isobutylene was detected in deionized water stored in each of the seven lots of 10-ml blood tubes tested; the expiration dates of the tubes tested spanned the years 2002-2022. Misidentification of isobutylene as methanol is possible when using a single-column gas chromatographic system. The presence of isobutylene in blood collected in a gray-top collection tube does not represent laboratory contamination, is not an interferent with blood ethanol quantitation, and does not affect the ethanol concentration in the blood. A 0.150 g/dl aqueous ethanol standard was stored in a gray-top tube to evaluate the potential impact of isobutylene on ethanol quantitation. The solution's average ethanol concentration measured after storage was 0.150 g/dl.

Comparison between a laser lancing device and lancet for capillary blood sampling, capillary blood hemoglobin measurement, and blood typing.

BACKGROUND: Blood donor screening includes tests using capillary blood, which is usually obtained by finger pricking using a lancet; however, the lancet has some shortcomings, such as skin puncture pain and needle stick injury. Recently, laser lancing devices for finger-prick sampling have been developed. We compared capillary blood Hb (cHb) levels and blood typing results obtained using a laser lancing device with those obtained using a lancet. STUDY DESIGN AND METHODS: cHb levels, blood typing results, and skin puncture pain scores were assessed in 191 participants. Finger-prick sampling was performed using LMT-1000 (LaMeditech, Seoul, Korea) and a lancet on the same finger on different hands. Paired venous Hb (vHb) levels were assessed in 103 participants using an automated hematology analyzer and compared with the cHb levels obtained using both lancing devices. RESULTS: The paired cHb results obtained with the laser lancing device and lancet showed a strong correlation (r = 0.927, p < .001) without any significant difference (p = .113) and a substantial agreement (κ = 0.654) for the identification of participants with a low Hb level (<12.5 g/dl). cHb levels were significantly higher than vHb levels with both lancing devices (mean differences: 0.27-0.43 g/dl). The results of blood typing using the laser lancing device showed 100% accuracy. Use of the laser lancing device showed significantly lower skin puncture pain scores (p < .001). CONCLUSION: Use of a laser lancing device for capillary Hb measurement and blood typing showed accurate results, with significantly reduced skin puncture pain. Laser lancing devices could be feasible for donor screening tests.

Diagnostic Accuracy of Dried Blood Spots Collected on HemaSpot HF Devices Compared to Venous Blood Specimens To Estimate Measles and Rubella Seroprevalence.

Fingerprick blood spotted onto filter paper offers an alternative to venous blood for use in population-based surveillance because it is comparatively inexpensive, acceptable, and easy to manage in the field. Prior studies have shown excellent agreement for immunoglobulin G (IgG) antibody detection from dried blood spots (DBS) and venous blood samples. However, much of this evidence is from high-income settings or laboratories where the samples were unlikely to be exposed to extreme temperatures and humidity, factors known to degrade DBS. We report the diagnostic accuracy of DBS collected using HemaSpot HF devices against venous sera in measuring measles- and rubella-specific IgG antibodies in a household serosurvey conducted in two districts in India. Paired serum and DBS samples collected by fingerprick were collected from women aged 15 to 50 years enrolled in a serosurvey in Palghar District of Maharashtra and Kanpur Nagar District of Uttar Pradesh in India. Specimen quality and volume were assessed in the laboratory. Samples were tested for antimeasles and antirubella IgG antibodies by an enzyme-linked immunosorbent assay (ELISA) (Euroimmun). Sensitivity of antibody detection by DBS was greater than 98%, and specificity was 90% and 98%, for measles and rubella IgG, respectively. Antibody concentrations were strongly correlated between paired specimens with adequate volume (measles R2 = 0.94; rubella R2 = 0.89). Although correlation was poor if DBS specimens had lower volumes, impact on qualitative results was minimal. This study showed DBS collected with HemaSpot HF devices can generate highly accurate results of measles- and rubella-specific IgG compared to sera in community-based surveys when protocols are optimized for DBS specimens. IMPORTANCE Dried blood spot (DBS) collection provides an easy, practical, and acceptable alternative to venous blood collection, especially for community-based studies, provided that results from DBS are accurate. We demonstrated high sensitivity and specificity for measles- and rubella-specific immunoglobulin G (IgG) with DBS collected via HemaSpot HF devices compared to serum samples. This is one of the largest community-based diagnostic accuracy studies of measles and rubella antibody testing with DBS and the first application we are aware of using HemaSpot HF device for measles and rubella serology. Results support the use of DBS in community-based serosurveillance.

The rise in preanalytical errors during COVID-19 pandemic.

INTRODUCTION: The COVID-19 pandemic has posed several challenges to clinical laboratories across the globe. Amidst the outbreak, errors occurring in the preanalytical phase of sample collection, transport and processing, can further lead to undesirable clinical consequences. Thus, this study was designed with the following objectives: (i) to determine and compare the blood specimen rejection rate of a clinical laboratory and (ii) to characterise and compare the types of preanalytical errors between the pre-pandemic and the pandemic phases. MATERIALS AND METHODS: This retrospective study was carried out in a trauma-care hospital, presently converted to COVID-19 care centre. Data was collected from (i) pre-pandemic phase: 1st October 2019 to 23rd March 2020 and (ii) pandemic phase: 24th March to 31st October 2020. Blood specimen rejection rate was calculated as the proportion of blood collection tubes with preanalytical errors out of the total number received, expressed as percentage. RESULTS: Total of 107,716 blood specimens were screened of which 43,396 (40.3%) were received during the pandemic. The blood specimen rejection rate during the pandemic was significantly higher than the pre-pandemic phase (3.0% versus 1.1%; P < 0.001). Clotted samples were the commonest source of preanalytical errors in both phases. There was a significant increase in the improperly labelled samples (P < 0.001) and samples with insufficient volume (P < 0.001), whereas, a significant decline in samples with inadequate sample-anticoagulant ratio and haemolysed samples (P < 0.001). CONCLUSION: In the ongoing pandemic, preanalytical errors and resultant blood specimen rejection rate in the clinical laboratory have significantly increased due to changed logistics. The study highlights the need for corrective steps at various levels to reduce preanalytical errors in order to optimise patient care and resource utilisation.

Evaluation of the quick-clotting serum separator tube, VQ-Tube™, for clinical chemistry and thyroid hormone assays.

BACKGROUND: The type of blood collection tube affects specimen quality and laboratory results. Because plasma specimens have a shorter processing time compared with serum specimens, emergency biochemistry tests use plasma. However, serum specimens remain stable after centrifugation and show more accurate results than plasma. Therefore, a quick-clotting serum separator tube is expected to be useful for shorter turnaround times and accurate results. We evaluated a new quick-clotting serum separator tube VQ-Tube™ (AB Medical, Korea) for clinical chemistry and thyroid hormone assays. METHODS: One hundred volunteers from four university hospitals were recruited, and peripheral blood samples were collected in quick-clotting serum separator tube VQ-Tubes™ and the commonly used serum separator tube V-Tubes™. The obtained specimens were used for 16 clinical chemistry assays and three thyroid hormone assays. RESULTS: The differences (%) in the test results obtained from the samples in each tube satisfied the allowable difference ranges (19 assays). The differences in the test results between the tubes satisfied the desired specifications for accuracy except for the glucose results (2.75%). The paired t-test revealed significant differences between the results of six assays, but each set of results showed a good correlation. Samples were visually inspected for serum clarity and gel barrier integrity, and incomplete clotting reactions and haemolysed serum were not observed. CONCLUSIONS: The new quick-clotting VQ-Tube™ demonstrated reliable test results compared with the commonly used serum separator tube V-Tube™. This quick-clotting tube will provide fast test results with adequately separated serum specimens, especially for patients who need fast tests.

COVID-19 serological survey using micro blood sampling.

During August 2020, we carried out a serological survey among students and employees at the Okinawa Institute of Science and Technology Graduate University (OIST), Japan, testing for the presence of antibodies against SARS-CoV-2, the causative agent of COVID-19. We used a FDA-authorized 2-step ELISA protocol in combination with at-home self-collection of blood samples using a custom low-cost finger prick-based capillary blood collection kit. Although our survey did not find any COVID-19 seropositive individuals among the OIST cohort, it reliably detected all positive control samples obtained from a local hospital and excluded all negatives controls. We found that high serum antibody titers can persist for more than 9 months post infection. Among our controls, we found strong cross-reactivity of antibodies in samples from a serum pool from two MERS patients in the anti-SARS-CoV-2-S ELISA. Here we show that a centralized ELISA in combination with patient-based capillary blood collection using as little as one drop of blood can reliably assess the seroprevalence among communities. Anonymous sample tracking and an integrated website created a stream-lined procedure. Major parts of the workflow were automated on a liquid handler, demonstrating scalability. We anticipate this concept to serve as a prototype for reliable serological testing among larger populations.

Stability and validity of intact parathyroid hormone levels in different sample types and storage conditions.

BACKGROUND: Several pre-analytical factors can affect the measurement of intact Parathyroid Hormone (IPTH). In this study, we have investigated the effects of using different types of tubes, time elapsed before separation, and storage conditions over time on the measured values of IPTH. METHOD: Blood samples from 30 subjects were collected into plain, SST, and EDTA tubes. All serum and plasma were separated immediately (first set) and after 2 hrs delay (second set). The first set of samples were aliquoted and stored at RT (25°C), at fridge (4°C), and freezer (-20°C). IPTH was measured in all the stored aliquots at 2,4, and 8 days after collection using Architect analyzer. RESULTS: Paired T test and ANOVA repeated measures showed no significant difference between IPTH levels in all tubes. The second set of serum and plasma were significantly lower (3.8% and 7.4%, p < 0.001, respectively) when compared to samples measured initially. Serum samples stored at RT were significantly lower (by 45%,59%, and 77%) on days 2,4, and 8 when compared to the initial time (p < 0.001 in all cases). Plasma samples stored at RT, were significantly lower on day 8 after collection, by 30.8% (p < 0.001). These differences would be clinically important. CONCLUSION: Plasma IPTH can be stored at RT for up to four days. Both plasma and serum IPTH are not affected by a delay in the separation of up to two h and they can be stored for up to 8 days in a fridge or freezer without any clinically significant changes in their values.

Review of the Preanalytical Errors That Impact Therapeutic Drug Monitoring.

PURPOSE: Preanalytical errors comprise the majority of testing errors experienced by clinical laboratories and significantly impact the accuracy of therapeutic drug monitoring (TDM). METHODS: Specific preanalytical factors in sample timing, collection, transport, processing, and storage that lead to errors in TDM were reviewed. We performed a literature search using several scientific databases including PubMed, ScienceDirect, Scopus, Web of Science, and ResearchGate for human studies published in the English language from January 1980 to February 2021, reporting on TDM and the preanalytical phase. RESULTS: Blood collection errors (ie, wrong anticoagulant/clot activator used, via an intravenous line, incorrect time after dosing) delay testing, cause inaccurate results, and adversely impact patient care. Blood collected in lithium heparin tubes instead of heparin sodium tubes produce supertoxic lithium concentrations, which can compromise care. Specimens collected in serum separator gel tubes cause falsely decreased concentrations due to passive absorption into the gel when samples are not processed and analyzed quickly. Dried blood spots are popular for TDM as they are minimally invasive, allowing for self-sampling and direct shipping to a clinical laboratory using regular mail. However, blood collection techniques, such as trauma to the collection site, filter paper fragility, and hematocrit (Hct) bias, can adversely affect the accuracy of the results. Volumetric absorptive microsampling is a potential alternative to dried blood spot that offers fast, volume-fixed sampling, low pain tolerance, and is not susceptible to Hct concentrations. CONCLUSIONS: The identification of preanalytical factors that may negatively impact TDM is critical. Developing workflows that can standardize TDM practices, align appropriate timing and blood collection techniques, and specimen processing will eliminate errors.

An Evaluation of Two Capillary Sample Collection Kits for Laboratory Measurement of HbA1c.

Background: The COVID-19 pandemic has impacted the conduct of clinic visits. We conducted a study to evaluate two academic laboratories' fingerstick capillary blood collection kits suitable for home use for laboratory measurement of HbA1c. Methods: Four clinical sites recruited 240 participants (aged 4-80 years, HbA1c 5.1%-13.5%). Capillary blood samples were obtained by the participant or parent using collection kits from two laboratories (University of Minnesota Advanced Research and Diagnostic Laboratory (ARDL) and Children's Mercy Hospital Laboratory (CMH)) and mailed under varying shipping conditions by United States Postal Service to the laboratories. Comparisons were made between HbA1c measurements from capillary samples and contemporaneously obtained venous samples. The primary outcome was percentage of capillary HbA1c values within 5% of the corresponding venous values. Results: HbA1c values were within 5% of venous values for 96% of ARDL kit specimens shipped with a cold pack and 98% without a cold pack and 99% and 99%, respectively, for the CMH kits. R2 values were 0.98, 0.99, 0.99, and 0.99, respectively. Results appeared similar across HbA1c levels and for pediatric and adult participants. Usability survey scores were high. Conclusions: Capillary blood collection kits, suitable for home use, from two academic laboratories, were demonstrated to be easy to use and provided results that are comparable with those obtained from venous specimens. Based on these results, there is strong evidence that HbA1c measurements from capillary specimens obtained with these specific kits can be used interchangeably with HbA1c measurements from venous specimens for clinical research and clinical care.

The use of whole blood capillary samples to measure 15 analytes for a home-collect biochemistry service during the SARS-CoV-2 pandemic: A proposed model from North West London Pathology.

BACKGROUND: The COVID-19 pandemic has drastically changed the delivery of secondary care services. Self-collection of capillary blood at home can facilitate the monitoring of patients with chronic disease to support virtual clinics while mitigating the risk of SARS-CoV-2 infection and transmission. OBJECTIVE: To investigate the comparability of whole blood capillary and plasma venous samples for 15 routinely used biochemical analytes and to develop and pilot a user-friendly home-collection kit to support virtual outpatient clinical services. METHODS: To investigate the comparability of whole blood capillary and plasma venous samples for 15 routinely requested biochemical analytes, simultaneous samples of venous and capillary blood were collected in EDTA and lithium-heparin plasma separation tubes that were of 4-6 mL and 400-600 µL draw volume, respectively. Venous samples were analysed within 4 h of collection while capillary samples were kept at ambient temperature for three days until centrifugation and analysis. Analyte results that were comparable between the matrices were then piloted in a feasibility study in three outpatient clinical services. RESULTS: HbA1c, lipid profile and liver function tests were considered comparable and piloted in the patient feasibility study. The home-collect kit demonstrated good patient usability. CONCLUSION: Home collection of capillary blood could be a clinically-useful tool to deliver virtual care to patients with chronic disease.

Pneumatic tube validation: Reducing the need for donor samples by integrating a vial-embedded data logger.

BACKGROUND: The most common way to validate a pneumatic tube system is to compare pneumatic tube system-transported blood samples to blood samples carried by hand. The importance of measuring the forces inside the pneumatic tube system has also been emphasized. The aim of this study was to define a validation protocol using a mini data logger (VitalVial, Motryx Inc., Canada) to reduce the need for donor samples in pneumatic tube system validation. METHODS: As an indicator of the total vibration, the blood samples are exposed to under pneumatic tube system transportation; the area under the curve was determined by a VitalVial for all hospital Tempus600 lines using a five-day validation protocol. Only the three lines with the highest area under the curves were clinically validated by analysing potassium, lactate dehydrogenase and aspartate aminotransferase. A month after pneumatic tube system commissioning, a follow-up on laboratory data was performed. RESULTS: Mean area under the curve of the six lines ranged between 347 and 581. The variability of the area under the curve was between 1.51 and 11.55%. In the laboratory data follow-up, an increase in lactate dehydrogenase haemolysis was seen from the three lines with the highest area under the curve and the emergency department, which was not detected in the clinical validation. When the Tempus600 system was in commission, a higher mean area under the curve was measured. CONCLUSION: A three-day validation protocol using VitalVials is enough to determine the stability of a Tempus600 system and can greatly reduce the need for donor samples. When in commission, the stability of the pneumatic tube system should be verified and lactate dehydrogenase haemolysis should be routinely checked.

Alternative Sampling Devices to Collect Dried Blood Microsamples: State-of-the-Art.

ABSTRACT: Dried blood spots (DBS) have been used in newborn screening programs for several years. More recently, there has been growing interest in using DBS as a home sampling tool for the quantitative determination of analytes. However, this presents challenges, mainly because of the well-known hematocrit effect and other DBS-specific parameters, including spotted volume and punch site, which could add to the method uncertainty. Therefore, new microsampling devices that quantitatively collect capillary dried blood are continuously being developed. In this review, we provided an overview of devices that are commercially available or under development that allow the quantitative (volumetric) collection of dried blood (-based) microsamples and are meant to be used for home or remote sampling. Considering the field of therapeutic drug monitoring (TDM), we examined different aspects that are important for a device to be implemented in clinical practice, including ease of patient use, technical performance, and ease of integration in the workflow of a clinical laboratory. Costs related to microsampling devices are briefly discussed, because this additionally plays an important role in the decision-making process. Although the added value of home sampling for TDM and the willingness of patients to perform home sampling have been demonstrated in some studies, real clinical implementation is progressing at a slower pace. More extensive evaluation of these newly developed devices, not only analytically but also clinically, is needed to demonstrate their real-life applicability, which is a prerequisite for their use in the field of TDM.

Asynchronous Testing of 2 Specimen-Diversion Devices to Reduce Blood Culture Contamination: A Single-Site Product Supply Quality Improvement Project.

OBJECTIVE: Blood culture contamination above the national threshold has been a consistent clinical issue in the ED setting. Two commercially available devices were examined that divert an initial small volume of the specimen before the collection of blood culture to reduce skin contamination. METHODS: Prospectively, 2 different blood culture-diversion devices were made available in the unit supplies to ED clinicians at a single site during 2 different periods of time as a follow-up strategy to an ongoing quality improvement project. Blood samples were collected in the emergency department over a period of 16 months. A retrospective record review study was conducted comparing the use of the 2 specimen-diversion devices with no device (control group) for blood culture contamination rates. The main outcome of monthly blood culture contamination per device was tested using a Bayesian Poisson multilevel regression model. RESULTS: A total of 4030 blood samples were collected and analyzed from November 2017 to February 2019. The model estimated that the mean incidence of contaminated blood draws in the device A group was 0.29 (0.14-0.55) times the incidence of contaminated draws in the control group. The mean incidence of contaminated blood draws in the device B group was 0.23 (0.13-0.37) times the incidence of contaminated draws in the control group, suggesting that initial-diversion methods reduced blood culture contamination. CONCLUSION: Initial specimen-diversion devices supplement present standard phlebotomy protocols to bring down the blood culture contamination rate.

Inferences and Legal Considerations Following a Blood Collection Tube Recall.

In mid-2019, medical, forensic and legal communities were notified that a certain shipment of evacuated blood sampling tubes were recalled by the manufacturer. This recall order described that the preservative sodium fluoride (100 mg) and anticoagulant potassium oxalate (20 mg) were missing from a small batch of 10-mL evacuated tubes. This gave cause for concern for possible implications in criminal justice (e.g., in drink-driving offenses) when blood-alcohol concentrations are interpreted. In reality, the lack of an anticoagulant would have been immediately obvious during sample preparation, owing to the formation of a large clot in the tube when received. Certain impairing drugs (e.g., cocaine and 6-acetylmorphine) are unstable in blood and tend to degrade without an enzyme inhibitor, such as sodium fluoride, present. In reviewing available literature related to current practices and the stability of ethanol in stored blood samples, there does not appear to be a clear consensus regarding the amount of sodium fluoride preservative necessary, if any at all, when blood is taken from living subjects under sterile conditions for typical forensic ethanol analysis.

Comparison of Three Blood Collection Tubes for 35 Biochemical Analytes: The Becton Dickinson Barricor Tube, Serum Separating Tube, and Plasma Separating Tube.

The Barricor tube (Becton Dickinson [BD], Sunnyvale, CA, USA) was recently developed to mechanically separate plasma by increasing the centrifugation rate. We compared the Barricor tube with existing serum- and plasma-based tubes based on 35 biochemical analytes and preanalytical turnaround time (TAT). Blood samples were collected from 30 healthy volunteers in a Barricor tube, serum separating tube (SST, Vacutainer SST II Tube 8.5 mL, #368972; BD), or plasma separating tube (PST, Vacutainer PST Tube 8.0 mL, #367964; BD) in random order. Next, 27 chemistry analytes, six immunochemistry analytes, and two cardiac markers were compared using Passing-Bablok regression and the Bland-Altman method. Preanalytical TAT was measured for each tube. The Barricor tube exhibited bias exceeding the desirable limit for nine and four analytes compared with the SST and PST, respectively. The Barricor tube lactate dehydrogenase value showed a bias of -10.29% and -9.86% compared with that of the SST and PST, respectively. The preanalytical TAT of Barricor tube was 8.8 minutes, which was the shortest among the three tubes. The clinical performance of the Barricor tube was equivalent to that of the SST and PST for most analytes, with an apparent advantage in preanalytical TAT. When using the Barricor tube, the reference range needs to be changed for some analytes that exceed the desirable bias limit.